Caldigit Element Hub review: A compact Thunderbolt 4 hub for MacBook Pro

The minimalist CalDigit Element Hub highlights the power of Thunderbolt 4 featured on recent Apple devices.

CalDigit has been a bit of a fan favorite around these parts, with multiple AppleInsider staffers utilizing the popular TS3+ Thunderbolt 3 hub. The Element Hub is entirely different, more intended to work out of the home office.

It's more compact and is tailored to those using the latest 14-inch MacBook Pro or 16-inch MacBook Pro as they are the only Apple devices so far that are equipped with Thunderbolt 4 ports.

Living with the CalDigit Element hub

The Element Hub is one of the smallest Thunderbolt hubs and focuses on only two types of ports. It has an external power supply and connects via the bundled Thunderbolt 4 cable. It works with USB-4 and Thunderbolt 3 devices thanks to its onboard Thunderbolt 4 controller.

Like many of CalDigit's products, Element Hub is made from aluminum. On the side is a single upstream port to connect to your Mac. The downstream ports are along the front and the back.

It may be a small detail, but the Element Hub is reversible. No matter if you place it on the left or right of your Mac, it will still be facing upright. Both sides have the CalDigit logo, and the Thunderbolt ports are reversible.

CalDigit included a 0.8-meter cable in the box, which is great for the desk, but some setups may necessitate an additional purchase. If you've got a Mac Pro on the floor, you'll need a longer cord to put the dock on your desk.

Ports and connectivity

In total, the Element Hub has eight ports. There's a single upstream Thunderbolt 4 port to connect to your Mac or PC. Downstream lies three more Thunderbolt 4 ports as well as four USB-A ports. That's a total of seven input ports to connect additional peripherals or daisy chain more Thunderbolt devices.

If you're using a USB 4 host, you'll only be able to daisy-chain non-Thunderbolt devices.

Compared to many hubs out there, you can do quite a bit with this array of ports. You can power a single 8K display or two 6K displays at 60Hz.

It even supports Apple's legacy SuperDrive. CalDigit skirts this, providing a reliable USB-A connection for the aging disc reader.

The Element Hub can supply a constant stream of power to your device, up to 60W. No matter the devices connected to the hub, your Mac will still receive 60W of power. For iPad Pro users, you'll get up to 45W of power.

If you use the new 14-inch or 16-inch MacBook Pro, this may not be enough juice when the host is under load. It's below the more common 96W power supply we see on larger docks and certainly below the 140W max coming from MagSafe.

The USB-A ports can deliver up to 7.5W of power, and the Type-C ports can provide up to 15W to various accessories.

We'd say the port selection on the Element Hub will be divisive, and that's ok. There are enough USB-C hubs and Thunderbolt docks to cater to anyone's needs. For us, the Element Hub is near-perfect. We've continuously clamored for more Type-C ports on hubs and fewer legacy ones, especially on smaller units like this.

Apple reintroduced an SD card reader on the latest MacBook Pros, alongside an HDMI output. Plus the longstanding headphone jack. We don't need duplicates of those ports on our hub.

By putting more Thunderbolt/USB-C ports and USB-A ports, we can connect nearly everything we use day-to-day. Since Thunderbolt devices can daisy chain, all of those accessories we connect to one port. That leaves two Type-C ports for our various USB-C SSDs, microphones, and other accessories.

At this point, we have very few USB-A accessories hanging around. For the rare instances when we do need them, it's nice to have a quartet at the ready.

Ethernet is the only absent port we'd have liked to see. With gigabit internet going into the office, we prefer to be wired when we can. In our workflow, wired networking helps with our video upload speeds and reduces strain on the wireless network when transmitting data.

Fortunately, we have ports to spare for a dongle.

Should you buy

If the Element Hub is helpful to you will almost certainly depend on your workflow. We love the small size and the plethora of Thunderbolt ports to utilize. Plus, it's backward compatible with Thunderbolt 3 and USB 4 devices -- including iPad Pro.

It pairs wonderfully with the new MacBook Pros when combined with Apple's latest selection of ports.

But even though the dock is small, it still has a large power adapter which doesn't make the most portable solution. 60W of power is also not enough power you're pushing the 16-inch MacBook Pro.

If the Element Hub isn't what you're looking for, CalDigit also just announced a larger Thunderbolt 4 dock with an unprecedented number of ports. We'll be looking at that one soon.

Pros

• Sleek and strong aluminum design
• Compact size
• USB-A paired with four Thunderbolt 4 ports
• Backward compatible with USB 4 and Thunderbolt 3 devices
• Can daisy chain additional Thunderbolt devices

Cons

• Power adapter adds bulk
• Only 60W of power to the host isn't enough
• Port selection won't be for everybody

Rating: 4 out of 5

Where to buy

Grab the CalDigit Element Hub on Amazon for $270 or on B&H for $249.